These days, all of the completely new laptops or computers have SSD drives as an alternative for HDD drives. You can see superlatives on them all around the professional press – that they’re a lot faster and operate better and that they are the future of home pc and laptop generation.

Having said that, how do SSDs fare inside the web hosting environment? Are they responsible enough to substitute the tested HDDs? At neoBuzz, we’ll aid you better understand the differences in between an SSD as well as an HDD and judge the one that most closely fits you needs.

1. Access Time

Image

With the launch of SSD drives, file accessibility rates have gone tremendous. As a result of completely new electronic interfaces found in SSD drives, the normal file access time has shrunk towards a record low of 0.1millisecond.

Image

The technology driving HDD drives times all the way to 1954. Even though it has been drastically processed over time, it’s nevertheless can’t stand up to the ingenious technology driving SSD drives. With today’s HDD drives, the best data file access rate you are able to achieve varies between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Because of the very same radical approach which allows for a lot faster access times, you can also enjoy improved I/O performance with SSD drives. They will perform double the procedures throughout a specific time compared with an HDD drive.

An SSD can handle at least 6000 IO’s per second.

Image

Hard drives feature reduced data access speeds as a result of aging file storage and access technology they are using. Additionally they exhibit significantly sluggish random I/O performance as opposed to SSD drives.

In the course of our trials, HDD drives addressed typically 400 IO operations per second.

3. Reliability

Image

SSD drives lack any kind of moving components, which means that there is a lesser amount of machinery included. And the fewer actually moving elements you will discover, the lower the probability of failing are going to be.

The standard rate of failure of an SSD drive is 0.5%.

Image

HDD drives employ spinning disks for saving and reading info – a technology dating back to the 1950s. Along with hard disks magnetically suspended in the air, rotating at 7200 rpm, the probability of anything failing are considerably higher.

The standard rate of failure of HDD drives can vary amongst 2% and 5%.

4. Energy Conservation

Image

SSD drives are far smaller than HDD drives as well as they don’t possess any kind of moving elements at all. Because of this they don’t produce so much heat and require considerably less power to function and fewer energy for cooling reasons.

SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives can be renowned for becoming noisy; they can be at risk from getting hot and when you have several disk drives within a hosting server, you’ll want a further a / c unit used only for them.

In general, HDDs use up between 6 and 15 watts.

5. CPU Power

Image

SSD drives provide for faster file accessibility speeds, which generally, consequently, permit the CPU to finish data file queries considerably faster and to return to other responsibilities.

The typical I/O hold out for SSD drives is only 1%.

Image

HDD drives permit slower access rates rather than SSDs do, which will result in the CPU being required to delay, although arranging assets for the HDD to discover and return the required data file.

The average I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

Image

The majority of neoBuzz’s brand new servers now use simply SSD drives. Our own tests have established that by using an SSD, the common service time for any I/O request while running a backup continues to be below 20 ms.

Image

Using the same hosting server, yet this time equipped with HDDs, the end results were completely different. The regular service time for an I/O call changed in between 400 and 500 ms.

7. Backup Rates

Image

Discussing back ups and SSDs – we have witnessed a great progress in the backup speed as we transferred to SSDs. Currently, a typical server back–up can take only 6 hours.

Image

In the past, we’ve got worked with predominantly HDD drives with our web servers and we are well aware of their efficiency. On a server designed with HDD drives, a full server backup will take around 20 to 24 hours.

Should you want to without delay raise the efficiency of one’s sites without having to transform any kind of code, an SSD–powered website hosting solution is really a excellent solution. Check the Linux shared hosting – our solutions feature extremely fast SSD drives and are offered at the best prices.


  • Service guarantees

  •  
  • neoBuzz’s Virtual Private Servers provide no setup costs and function in a reliable network delivering 99.9% of uptime. Full SSH/full root access guaranteed.
  • Compare our prices

  •  
  • Have a look at our pricing and pick the very best Virtual Private Server for your dynamic websites. You’ll be able to migrate to a more advanced VPS package with a click.
  • Compare our hosting plans
  • Contact Us

  •  
  • You’ll be able to get in touch with us night and day by email or by using our ultra–fast ticketing system. We offer a 1–hour reply–back time warranty.